Current position: 英文主页 >> Members
Kuo Tian
Release time:2021-01-11
Team members Introduction:

教育经历：

  • 2008.9-2012.6 大连理工大学工程力学系 工学学士 导师：王博 教授

  • 2012.9-2018.9 大连理工大学工程力学系 工学博士 导师：王博 教授

  • 2016.10-2018.4 华盛顿大学航空航天系 联合培养博士 导师：Anthony Waas 欧洲科学与艺术学院院士

 

工作经历：

  • 2021.1-至今 大连理工大学工程力学系 副教授

 

研究方向：

  • 变保真度代理模型优化

  • 基于机器学习的结构优化算法

  • 网格变形

  • 模型降阶

  • 薄壳稳定性分析

 

主持项目：

  •  热振环境下异形曲面加筋壳降阶分析及多样性优化方法。国家自然科学基金青年基金项目（11902065） ，2020.1-2022.12

  •  热振环境下异形曲面加筋壳布局优化设计方法研究。中国博士后科学基金面上项目（2019M651107），2019.5-2020.12

  • ZL航天器结构优化设计。航天五院载人航天总体部横向项目，2018.11-2018.12

  • 气囊缓冲板拓扑优化分析。北京空间飞行器总体设计部，2019.12-2020.12

  • 异形曲壳智能降维重构方法研究及模板开发。大连理工大学人工智能研究院开放课题，2020.6-2022.6

  • 曲面加筋板优化算法研究。北京空间飞行器总体设计部，2020.9-2021.6

  • 整体壁板式回转结构大集中力载荷高效扩散算法与典型结构优化设计。北京空间飞行器总体设计部，2020.9-2021.9

  • 大型密封舱壁板结构多层级创新设计与优化。北京空间飞行器总体设计部，2020.10-2021.12

  • 基于全场变形测量的整体壁板式回转结构试验件静力试验。北京空间飞行器总体设计部，2020.9-2021.6

 

参与项目：

  • 计及缺陷敏感性的网格加筋筒壳结构轻量化设计理论与方法。科技部973计划青年科学家专题，2014.01-2018.12，总经费444万元

  • 多级网格加筋壳的低缺陷敏感性能研究与优化设计。国家自然科学基金面上项目，2014.01-2017.12，总经费82万元

  • 金属舱体拓扑优化设计。航天一院十所横向项目，2014.07-2014.12，总经费26万元

 

学术兼职：

  • 美国航空航天学会AIAA Member（857058）

  • 中国力学学会会员（S030004926M）

 

国际合作：

  • 德国宇航中心—薄壳稳定性

  • 美国橡树岭国家实验室/约翰霍普金斯大学—机器学习算法

  • 华盛顿大学/密歇根大学—复合材料结构、模型降阶

 

SCI期刊通讯审稿人：

  • Composite Structures

  • Composites Part B: Engineering

  • Journal of Pressure Vessel Technology-Transactions of the ASME

  • Journal of Reinforced Plastics and Composites

  • Thin-walled Structures

  • Aerospace Science and Technology

  • Measurement

  • Journal of Cleaner Production

  • Journal of the Brazilian Society of Mechanical Sciences and Engineering

  • Engineering Optimization

  • Structural and Multidisciplinary Optimization

  • Journal of Applied and Computational Mechanics 

  • Electronic Research Archive


SCI检索论文：

  • Tian K, Wang B, Zhou Y, et al. Proper-orthogonal-decomposition-based buckling analysis and optimization of hybrid fiber composite shells. AIAA Journal, 2018, 56(5): 1723-1730.

  • Tian K, Wang B, Zhang K, et al. Tailoring the optimal load-carrying efficiency of hierarchical stiffened shells by competitive sampling. Thin-Walled Structures, 2018, 133: 216-225.

  • Tian K, Wang B, Hao P, et al. A high-fidelity approximate model for determining lower-bound buckling loads for stiffened shells. International Journal of Solids and Structures, 2018, 148: 14-23.

  • Tian K, Jiaxin Zhang, Xiangtao Ma, et al.Buckling surrogate-based optimization framework for hierarchical stiffened composite shells by enhanced variance reduction method. Journal of Reinforced Plastics and Composites,2019,Accepted.

  • Tian K, Li ZC, Ma XT, et al. Toward the robust establishment of variable-fidelity surrogate models for hierarchical stiffened shells by two-step adaptive updating approach. Structural and Multidisciplinary Optimization, 2019, doi:10.1007/s00158-019-02432-2, accepted.

  • Tian K, Ma XT, Li ZC, et al. A multi-fidelity competitive sampling method for surrogate-based stacking sequence optimization of composite shells with multiple cutouts. International Journal of Solids and Structures, 2020, accepted.

  • Tian K, Li ZC, Huang L, et al. Enhanced variable-fidelity surrogate-based optimization framework by Gaussian process regression and fuzzy clustering, Computer Methods in Applied Mechanics and Engineering, 2020, accepted.

  • Tian K, Li HQ, Huang L, et al. Data-driven modelling and optimization of stiffeners on undevelopable curved surfaces, Structural and Multidisciplinary Optimization, 2020, accepted.

  • Tian K, Huang L, Sun Y, et al. Fast buckling load numerical prediction method for imperfect shells under axial compression based on POD and vibration correlation technique, Composite Structures, 2020, accepted.

  • Ma XT, Tian K(通讯), Li HQ, et al. Concurrent multi-scale optimization of hybrid composite plates and shells for vibration. Composite Structures, 2019, doi: 10.2514/1.J058064, accepted.

  • Ma XT, Tian K(通讯), Li HQ, et al. Diverse discrete optimization for multi-patch laminates under vibration environment. Structural and Multidisciplinary Optimization, 2020, accepted.

  • Wang B, Zhou Y, Tian K(通讯), Wang GM. Novel implementation of extrusion constraint in topology optimization by Helmholtz-type anisotropic filter. Structural and Multidisciplinary Optimization, 2020, accepted.

  • Sun Y, Tian K(通讯), Li R, Wang B. Accelerated Koiter method for post-buckling analysis of thin-walled shells under axial compression. Thin-walled Structures, 2020, accepted.

  • Li Y W, Tian K(通讯), Hao P, Wang B. Optimization design for vibration reduction of complex configuration structures via global reduced-order basis, Engineering Optmization, 2020, accepted.

  • Kolahchi R, Tian K, Keshtegar B, et al. AK-GWO: a novel hybrid optimization method for accurate optimum hierarchical stiffened shells. Engineering with Computers, 2020, accepted.

  • Zhou Y, Tian K, Xu SL, Wang B. Two-scale buckling topology optimization for grid-stiffened cylindrical shells. Thin-walled Structures, 2020, accepted.

  • Li YW, Tian K, Hao P, et al. Finite element model updating for repeated eigenvalue structures via the reduced-order model using incomplete measured modes. Mechanical Systems and Signal Processing, 2020, accepted.

  • Wang B, Tian K, Hao P, Cai YW, Li YW, Sun Y. Hybrid analysis and optimization of hierarchical stiffened plates based on asymptotic homogenization method. Composite Structures, 132: 136-147, 2015. 

  • Wang B, Tian K, Hao P, Zheng YB, Ma YL, Wang JB. Numerical-based smeared stiffener method for global buckling analysis of grid-stiffened composite cylindrical shells. Composite Structures, 152: 807-815, 2016. 

  • Wang B, Tian K, Zhou CH, Hao P, Zheng YB, Ma YL, Wang JB. Grid-pattern optimization framework of novel hierarchical stiffened shells allowing for imperfection sensitivity. Aerospace Science and Technology, 62: 114-121, 2017.

  • Wang B, Tian K, Zhao HX, Hao P, Zhu TY, Zhang K, Ma YL. Multilevel optimization framework for hierarchical stiffened shells accelerated by adaptive equivalent strategy. Applied Composite Materials, 24(3): 575-592, 2017.

  • Hao P, Wang B, Tian K, Li G, Du KF, Niu F. Efficient optimization of cylindrical stiffened shells with reinforced cutouts by curvilinear stiffeners. AIAA Journal, 54(4): 1350-1363, 2016.

  • Hao P, Wang B, Tian K, Du KF, Zhang X. Influence of imperfection distributions for cylindrical stiffened shells with weld lands. Thin-Walled Structures, 93: 177-187, 2015.

  • Hao P, Wang B, Tian K, Li G, Zhang X. Optimization of curvilinearly stiffened panels with single cutout concerning the collapse load. International Journal of Structural Stability and Dynamics, 16(7), 1550036 (21 pages), 2016.

  • Hao P, Wang B, Tian K, Li G, Du KF, Luan Y. Integrated optimization of hybrid-stiffness stiffened shells based on sub-panel elements. Thin-Walled Structures, 103: 171-182, 2016.

  • Hao P, Wang B, Tian K, Liu HL, Wang YT, Niu F, Zeng DJ. Simultaneous buckling design of stiffened shells with multiple cutouts. Engineering Optimization, 49(7): 1116-1132, 2017.

  • Hao P, Wang B, Tian K, Li G, Sun Y, Zhou CX. Fast procedure for non-uniform optimum design of stiffened shells under buckling constraint. Structural and Multidisciplinary Optimization, 55(4): 1503-1516, 2017.

  • Zhou CH, Jiang L, Tian K, et al. Origami crash boxes subjected to dynamic oblique loading. Journal of Applied Mechanics, 2017, 84(9): 091006.

  • Wang B, Ma XT, Tian K, et al. Concurrent patch optimization of hybrid composite plates based on proper orthogonal decomposition. AIAA Journal, 57(11): 4915-4926, 2019.

 

EI检索论文：

  • 王博, 田阔, 郝鹏, 等. 多级加筋板结构承载性能与缺陷敏感度研究. 固体火箭技术, 2014, 37(3): 408-412.

  • 王博, 田阔, 郑岩冰, 等. 超大直径网格加筋筒壳快速屈曲分析方法. 航空学报, 2017, 38(2): 178-186.

  • 李增聪, 田阔(通讯), 赵海心. 面向多级加筋壳的高效变保真度代理模型. 航空学报, 2019, 已录用.

  • 李增聪, 陈燕, 李红庆, 田阔(通讯), 等. 面向集中力扩散的回转曲面加筋拓扑曲面加筋拓扑优化方法. 航空学报, 2020, 已录用.

 

核心期刊：

  • 王博, 田阔, 郝鹏, 等. 变截面加筋板尺寸-布局一体化设计. 固体火箭技术, 2017, 40(2): 208-213.

 

专利、软件著作权情况

  • 王博，田阔，郝鹏，等. 一种梯度分布式加筋补强筒壳结构. 国家发明专利：CN106956784B. 授权日期：2019.01.01.

  • 郝鹏，黄诚，王博，田阔，等. 一种轴压加筋柱壳的开口补强方法. 国家发明专利：2015102797836. 授权日期：2017.07.11.

  • 王博，郝鹏，李刚，田阔，等. 一种轴压筒壳结构承载力折减因子确定方法. 国家发明专利：201310113723.8. 授权日期：2015.10.28.

  • 郝鹏，王博，田阔，等. 軸方向圧力補強リブ円筒殻における開口補強方法. 日本发明专利：2016-054255. 授权日期：2017.11.02.

  • 王博，郝鹏，李刚，田阔，等. Method for determining reduction factor of bearing capacity of axial load cylindrical shell structure. 美国发明专利：US9645054. 授权日期：2017.05.09.

  • 王博，郝鹏，李刚，田阔，等. Method for determining reduction factor of bearing capacity of axial load cylindrical shell structure. 欧盟发明专利：14779155.2. 授权日期：2018.08.27.

  • 王博，田阔，赵海心，等，网格加筋筒壳快速屈曲分析和优化软件. 公开日期：2015.10.10.

  • 田阔，李增聪，杜凯繁，王博，一种基于两步自适应加点策略的变保真度代理模型建立方法，201911210341.0，申请日期：2019.12. 02

  • 田阔，马翔涛，王博，郭杰，郝鹏，周演，一种面向混杂纤维复合材料板壳结构的快速协同优化方法，201910306542.4，申请日期：2019.04. 17

  • 王博，田阔，周演，李增聪，一种基于各向异性过滤技术的异形曲面加筋拓扑优化方法，201911179223.8，申请日期：2019.11. 27

  • 田阔，王博，李红庆，黄蕾，李增聪，一种基于网格变形技术的异形曲面加筋壳建模方法，201911262361.2，申请日期：2019.12.11

  • 王博，毕祥军，杜凯繁，田阔，宋志博，赵海鑫，明士朝，一种基于电测技术的应变场实时重构方法，2019103658932，申请日期：2019.05.05

  • 田阔，王博，黄蕾，李增聪，郝鹏，杜凯繁，石云峰，一种快速求解含缺陷薄壳结构屈曲载荷的数值振动方法，202010587841.2，申请日期：2020.06.25

  • 可钊，田阔，李增聪，石云峰，周才华，杜凯繁，一种基于刚度等效和模型降阶的减振优化快速计算方法，202011461394.2，申请日期2020.12.14